659 lines
31 KiB
Text
659 lines
31 KiB
Text
1
|
|
|
|
Abaqus 6.10-1 Date 14-Jan-2013 Time 09:49:21
|
|
For use at NATIONAL UNIVERSITY OF IRELAND under license from Dassault Systemes or its subsidiary.
|
|
|
|
|
|
|
|
STEP 1 INCREMENT 1 STEP TIME 0.00
|
|
|
|
|
|
S T E P 1 T R A N S I E N T H E A T T R A N S F E R
|
|
|
|
|
|
|
|
|
|
AUTOMATIC TIME CONTROL WITH -
|
|
A SUGGESTED INITIAL TIME INCREMENT OF 1.000E-02
|
|
AND A TOTAL TIME PERIOD OF 0.100
|
|
THE MINIMUM TIME INCREMENT ALLOWED IS 1.000E-09
|
|
THE MAXIMUM TIME INCREMENT ALLOWED IS 1.000E-02
|
|
|
|
THE SIZE OF THE TIME INCREMENT IS CONTROLLED BY -
|
|
THE TEMPERATURE CHANGE PER INCREMENT NOT EXCEEDING 100.
|
|
|
|
CONVERGENCE TOLERANCE PARAMETERS FOR HEAT FLUX
|
|
CRITERION FOR RESIDUAL HEAT FLUX FOR A NONLINEAR PROBLEM 5.000E-03
|
|
CRITERION FOR TEMP. CORRECTION IN A NONLINEAR PROBLEM 1.000E-02
|
|
INITIAL VALUE OF TIME AVERAGE HEAT FLUX 1.000E-02
|
|
AVERAGE HEAT FLUX IS TIME AVERAGE HEAT FLUX
|
|
ALTERNATE CRIT. FOR RESIDUAL HEAT FLUX FOR A NONLINEAR PROBLEM 2.000E-02
|
|
CRITERION FOR ZERO HEAT FLUX RELATIVE TO TIME AVRG. HEAT FLUX 1.000E-05
|
|
CRITERION FOR RESIDUAL HEAT FLUX WHEN THERE IS ZERO FLUX 1.000E-05
|
|
CRITERION FOR TEMP. CORRECTION WHEN THERE IS ZERO FLUX 1.000E-03
|
|
CRITERION FOR RESIDUAL HEAT FLUX FOR A LINEAR INCREMENT 1.000E-08
|
|
FIELD CONVERSION RATIO 1.00
|
|
CRITERION FOR ZERO HEAT FLUX REL. TO TIME AVRG. MAX. HEAT FLUX 1.000E-05
|
|
|
|
VOLUMETRIC STRAIN COMPATIBILITY TOLERANCE FOR HYBRID SOLIDS 1.000E-05
|
|
AXIAL STRAIN COMPATIBILITY TOLERANCE FOR HYBRID BEAMS 1.000E-05
|
|
TRANS. SHEAR STRAIN COMPATIBILITY TOLERANCE FOR HYBRID BEAMS 1.000E-05
|
|
SOFT CONTACT CONSTRAINT COMPATIBILITY TOLERANCE FOR P>P0 5.000E-03
|
|
SOFT CONTACT CONSTRAINT COMPATIBILITY TOLERANCE FOR P=0.0 0.100
|
|
CONTACT FORCE ERROR TOLERANCE FOR CONVERT SDI=YES 1.00
|
|
DISPLACEMENT COMPATIBILITY TOLERANCE FOR DCOUP ELEMENTS 1.000E-05
|
|
ROTATION COMPATIBILITY TOLERANCE FOR DCOUP ELEMENTS 1.000E-05
|
|
|
|
TIME INCREMENTATION CONTROL PARAMETERS:
|
|
FIRST EQUILIBRIUM ITERATION FOR CONSECUTIVE DIVERGENCE CHECK 4
|
|
EQUILIBRIUM ITERATION AT WHICH LOG. CONVERGENCE RATE CHECK BEGINS 8
|
|
EQUILIBRIUM ITERATION AFTER WHICH ALTERNATE RESIDUAL IS USED 9
|
|
MAXIMUM EQUILIBRIUM ITERATIONS ALLOWED 16
|
|
EQUILIBRIUM ITERATION COUNT FOR CUT-BACK IN NEXT INCREMENT 10
|
|
MAXIMUM EQUILIB. ITERS IN TWO INCREMENTS FOR TIME INCREMENT INCREASE 4
|
|
MAXIMUM ITERATIONS FOR SEVERE DISCONTINUITIES 12
|
|
MAXIMUM CUT-BACKS ALLOWED IN AN INCREMENT 5
|
|
MAXIMUM DISCON. ITERS IN TWO INCREMENTS FOR TIME INCREMENT INCREASE 6
|
|
MAXIMUM CONTACT AUGMENTATIONS FOR *SURFACE BEHAVIOR,AUGMENTED LAGRANGE 6
|
|
CONSECUTIVE INCS MEETING TIME INTEG. TOL. FOR TIME INC. INCREASE 3
|
|
CUT-BACK FACTOR AFTER DIVERGENCE 0.2500
|
|
CUT-BACK FACTOR FOR TOO SLOW CONVERGENCE 0.5000
|
|
CUT-BACK FACTOR AFTER TOO MANY EQUILIBRIUM ITERATIONS 0.7500
|
|
CUT-BACK FACTOR AFTER TOO MANY SEVERE DISCONTINUITY ITERATIONS 0.2500
|
|
CUT-BACK FACTOR AFTER PROBLEMS IN ELEMENT ASSEMBLY 0.2500
|
|
INCREASE FACTOR AFTER TWO INCREMENTS THAT CONVERGE QUICKLY 1.500
|
|
MAX. TIME INCREMENT INCREASE FACTOR ALLOWED 1.500
|
|
MAX. TIME INCREMENT INCREASE FACTOR ALLOWED (DYNAMICS) 1.250
|
|
MAX. TIME INCREMENT INCREASE FACTOR ALLOWED (DIFFUSION) 2.000
|
|
MINIMUM TIME INCREMENT RATIO FOR EXTRAPOLATION TO OCCUR 0.1000
|
|
CUT-BACK FACTOR WHEN TIME INTEGRATION ACCURACY TOL. EXCEEDED 0.8500
|
|
MAX. RATIO OF TIME INTEG. MEASURE TO TOL. FOR TIME INC. INCREASE 0.7500
|
|
INCREASE FACTOR FOR TIME INCREMENT WHEN POSSIBLE 0.8000
|
|
MIN. TIME INC. INCREASE FACTOR IN LINEAR TRANSIENT PROBLEMS 0.9500
|
|
MAX. RATIO OF TIME INCREMENT TO STABILITY LIMIT 1.000
|
|
FRACTION OF STABILITY LIMIT FOR NEW TIME INCREMENT 0.9500
|
|
TIME INCREMENT INCREASE FACTOR BEFORE A TIME POINT 1.000
|
|
AUTOMATIC TOLERANCES FOR OVERCLOSURE AND SEPARATION
|
|
PRESSURE ARE SUPPRESSED
|
|
GLOBAL STABILIZATION CONTROL IS NOT USED
|
|
FRICTION IS INCLUDED IN INCREMENT THAT THE CONTACT POINT CLOSES
|
|
|
|
PRINT OF INCREMENT NUMBER, TIME, ETC., EVERY 1 INCREMENTS
|
|
|
|
THE MAXIMUM NUMBER OF INCREMENTS IN THIS STEP IS 100
|
|
|
|
UNSYMMETRIC MATRIX STORAGE AND SOLUTION WILL BE USED
|
|
|
|
LINEAR EXTRAPOLATION WILL BE USED
|
|
|
|
DETAILS REGARDING ACTUAL SOLUTION WAVEFRONT REQUESTED
|
|
|
|
DETAILED OUTPUT OF DIAGNOSTICS TO DATABASE REQUESTED
|
|
|
|
PRINT OF INCREMENT NUMBER, TIME, ETC., TO THE MESSAGE FILE EVERY 1 INCREMENTS
|
|
|
|
EQUATIONS ARE BEING REORDERED TO MINIMIZE WAVEFRONT
|
|
|
|
COLLECTING MODEL CONSTRAINT INFORMATION FOR OVERCONSTRAINT CHECKS
|
|
|
|
COLLECTING STEP CONSTRAINT INFORMATION FOR OVERCONSTRAINT CHECKS
|
|
|
|
|
|
INCREMENT 1 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT 1.000E-02
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 1
|
|
|
|
|
|
AVERAGE HEAT FLUX 0.400 TIME AVG. HEAT FLUX 0.400
|
|
LARGEST RESIDUAL HEAT FLUX 1.568E-15 AT NODE 2 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. -3.47 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. -3.47 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
THE HEAT FLUX EQUILIBRIUM RESPONSE WAS LINEAR IN THIS INCREMENT
|
|
|
|
MAXIMUM NON-PRESCRIBED INCREMENT IN TEMPERATURE IS -3.47
|
|
|
|
ITERATION SUMMARY FOR THE INCREMENT: 1 TOTAL ITERATIONS, OF WHICH
|
|
0 ARE SEVERE DISCONTINUITY ITERATIONS AND 1 ARE EQUILIBRIUM ITERATIONS.
|
|
|
|
TIME INCREMENT COMPLETED 1.000E-02, FRACTION OF STEP COMPLETED 0.100
|
|
STEP TIME COMPLETED 1.000E-02, TOTAL TIME COMPLETED 1.000E-02
|
|
|
|
|
|
INCREMENT 2 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT 1.000E-02
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 1
|
|
|
|
|
|
AVERAGE HEAT FLUX 4.14 TIME AVG. HEAT FLUX 2.27
|
|
LARGEST RESIDUAL HEAT FLUX 14.6 AT NODE 3 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. -2.25 AT NODE 3 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. 2.18 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
HEAT FLUX EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 2
|
|
|
|
|
|
AVERAGE HEAT FLUX 6.38 TIME AVG. HEAT FLUX 3.39
|
|
LARGEST RESIDUAL HEAT FLUX 24.1 AT NODE 3 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. -3.77 AT NODE 3 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. -1.52 AT NODE 3 DOF 12
|
|
INSTANCE: PART-1-1
|
|
HEAT FLUX EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 3
|
|
|
|
|
|
AVERAGE HEAT FLUX 10.1 TIME AVG. HEAT FLUX 5.25
|
|
LARGEST RESIDUAL HEAT FLUX 39.9 AT NODE 3 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. -6.28 AT NODE 3 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. -2.51 AT NODE 3 DOF 12
|
|
INSTANCE: PART-1-1
|
|
HEAT FLUX EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 4
|
|
|
|
|
|
AVERAGE HEAT FLUX 16.2 TIME AVG. HEAT FLUX 8.32
|
|
LARGEST RESIDUAL HEAT FLUX 66.0 AT NODE 3 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. -10.4 AT NODE 3 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. -4.15 AT NODE 3 DOF 12
|
|
INSTANCE: PART-1-1
|
|
HEAT FLUX EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.
|
|
|
|
|
|
***NOTE: THE SOLUTION APPEARS TO BE DIVERGING. CONVERGENCE IS JUDGED UNLIKELY.
|
|
|
|
|
|
INCREMENT 2 STARTS. ATTEMPT NUMBER 2, TIME INCREMENT 2.500E-03
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 1
|
|
|
|
|
|
AVERAGE HEAT FLUX 0.713 TIME AVG. HEAT FLUX 0.557
|
|
LARGEST RESIDUAL HEAT FLUX -0.923 AT NODE 3 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. 0.383 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. 1.25 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
HEAT FLUX EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 2
|
|
|
|
|
|
AVERAGE HEAT FLUX 0.850 TIME AVG. HEAT FLUX 0.625
|
|
LARGEST RESIDUAL HEAT FLUX -8.521E-15 AT NODE 3 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. 0.504 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. 0.126 AT NODE 3 DOF 12
|
|
INSTANCE: PART-1-1
|
|
THE HEAT FLUX EQUILIBRIUM EQUATIONS HAVE CONVERGED
|
|
|
|
MAXIMUM NON-PRESCRIBED INCREMENT IN TEMPERATURE IS 0.504
|
|
|
|
ITERATION SUMMARY FOR THE INCREMENT: 2 TOTAL ITERATIONS, OF WHICH
|
|
0 ARE SEVERE DISCONTINUITY ITERATIONS AND 2 ARE EQUILIBRIUM ITERATIONS.
|
|
|
|
TIME INCREMENT COMPLETED 2.500E-03, FRACTION OF STEP COMPLETED 0.125
|
|
STEP TIME COMPLETED 1.250E-02, TOTAL TIME COMPLETED 1.250E-02
|
|
|
|
|
|
INCREMENT 3 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT 2.500E-03
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 1
|
|
|
|
|
|
AVERAGE HEAT FLUX 0.855 TIME AVG. HEAT FLUX 0.701
|
|
LARGEST RESIDUAL HEAT FLUX 8.410E-15 AT NODE 3 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. 0.376 AT NODE 2 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. -0.138 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
THE HEAT FLUX EQUILIBRIUM RESPONSE WAS LINEAR IN THIS INCREMENT
|
|
|
|
MAXIMUM NON-PRESCRIBED INCREMENT IN TEMPERATURE IS 0.376
|
|
TIME INCREMENT MAY NOW INCREASE TO 5.000E-03
|
|
|
|
ITERATION SUMMARY FOR THE INCREMENT: 1 TOTAL ITERATIONS, OF WHICH
|
|
0 ARE SEVERE DISCONTINUITY ITERATIONS AND 1 ARE EQUILIBRIUM ITERATIONS.
|
|
|
|
TIME INCREMENT COMPLETED 2.500E-03, FRACTION OF STEP COMPLETED 0.150
|
|
STEP TIME COMPLETED 1.500E-02, TOTAL TIME COMPLETED 1.500E-02
|
|
|
|
|
|
INCREMENT 4 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT 5.000E-03
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 1
|
|
|
|
|
|
AVERAGE HEAT FLUX 0.831 TIME AVG. HEAT FLUX 0.734
|
|
LARGEST RESIDUAL HEAT FLUX 8.868E-15 AT NODE 3 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. 0.423 AT NODE 2 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. -0.330 AT NODE 2 DOF 12
|
|
INSTANCE: PART-1-1
|
|
THE HEAT FLUX EQUILIBRIUM RESPONSE WAS LINEAR IN THIS INCREMENT
|
|
|
|
MAXIMUM NON-PRESCRIBED INCREMENT IN TEMPERATURE IS 0.423
|
|
TIME INCREMENT MAY NOW INCREASE TO 1.000E-02
|
|
|
|
ITERATION SUMMARY FOR THE INCREMENT: 1 TOTAL ITERATIONS, OF WHICH
|
|
0 ARE SEVERE DISCONTINUITY ITERATIONS AND 1 ARE EQUILIBRIUM ITERATIONS.
|
|
|
|
TIME INCREMENT COMPLETED 5.000E-03, FRACTION OF STEP COMPLETED 0.200
|
|
STEP TIME COMPLETED 2.000E-02, TOTAL TIME COMPLETED 2.000E-02
|
|
|
|
|
|
INCREMENT 5 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT 1.000E-02
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 1
|
|
|
|
|
|
AVERAGE HEAT FLUX 0.745 TIME AVG. HEAT FLUX 0.736
|
|
LARGEST RESIDUAL HEAT FLUX -5.773E-15 AT NODE 4 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. 0.446 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. -0.406 AT NODE 2 DOF 12
|
|
INSTANCE: PART-1-1
|
|
THE HEAT FLUX EQUILIBRIUM RESPONSE WAS LINEAR IN THIS INCREMENT
|
|
|
|
MAXIMUM NON-PRESCRIBED INCREMENT IN TEMPERATURE IS 0.446
|
|
|
|
ITERATION SUMMARY FOR THE INCREMENT: 1 TOTAL ITERATIONS, OF WHICH
|
|
0 ARE SEVERE DISCONTINUITY ITERATIONS AND 1 ARE EQUILIBRIUM ITERATIONS.
|
|
|
|
TIME INCREMENT COMPLETED 1.000E-02, FRACTION OF STEP COMPLETED 0.300
|
|
STEP TIME COMPLETED 3.000E-02, TOTAL TIME COMPLETED 3.000E-02
|
|
|
|
|
|
INCREMENT 6 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT 1.000E-02
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 1
|
|
|
|
|
|
AVERAGE HEAT FLUX 0.657 TIME AVG. HEAT FLUX 0.723
|
|
LARGEST RESIDUAL HEAT FLUX -7.147E-15 AT NODE 3 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. 0.292 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. -0.156 AT NODE 2 DOF 12
|
|
INSTANCE: PART-1-1
|
|
THE HEAT FLUX EQUILIBRIUM RESPONSE WAS LINEAR IN THIS INCREMENT
|
|
|
|
MAXIMUM NON-PRESCRIBED INCREMENT IN TEMPERATURE IS 0.292
|
|
|
|
ITERATION SUMMARY FOR THE INCREMENT: 1 TOTAL ITERATIONS, OF WHICH
|
|
0 ARE SEVERE DISCONTINUITY ITERATIONS AND 1 ARE EQUILIBRIUM ITERATIONS.
|
|
|
|
TIME INCREMENT COMPLETED 1.000E-02, FRACTION OF STEP COMPLETED 0.400
|
|
STEP TIME COMPLETED 4.000E-02, TOTAL TIME COMPLETED 4.000E-02
|
|
|
|
|
|
INCREMENT 7 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT 1.000E-02
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 1
|
|
|
|
|
|
AVERAGE HEAT FLUX 0.576 TIME AVG. HEAT FLUX 0.702
|
|
LARGEST RESIDUAL HEAT FLUX 1.817E-14 AT NODE 3 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. 0.216 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. -7.617E-02 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
THE HEAT FLUX EQUILIBRIUM RESPONSE WAS LINEAR IN THIS INCREMENT
|
|
|
|
MAXIMUM NON-PRESCRIBED INCREMENT IN TEMPERATURE IS 0.216
|
|
|
|
ITERATION SUMMARY FOR THE INCREMENT: 1 TOTAL ITERATIONS, OF WHICH
|
|
0 ARE SEVERE DISCONTINUITY ITERATIONS AND 1 ARE EQUILIBRIUM ITERATIONS.
|
|
|
|
TIME INCREMENT COMPLETED 1.000E-02, FRACTION OF STEP COMPLETED 0.500
|
|
STEP TIME COMPLETED 5.000E-02, TOTAL TIME COMPLETED 5.000E-02
|
|
|
|
|
|
INCREMENT 8 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT 1.000E-02
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 1
|
|
|
|
|
|
AVERAGE HEAT FLUX 0.503 TIME AVG. HEAT FLUX 0.677
|
|
LARGEST RESIDUAL HEAT FLUX -4.458E-15 AT NODE 3 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. 0.172 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. -4.391E-02 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
THE HEAT FLUX EQUILIBRIUM RESPONSE WAS LINEAR IN THIS INCREMENT
|
|
|
|
MAXIMUM NON-PRESCRIBED INCREMENT IN TEMPERATURE IS 0.172
|
|
|
|
ITERATION SUMMARY FOR THE INCREMENT: 1 TOTAL ITERATIONS, OF WHICH
|
|
0 ARE SEVERE DISCONTINUITY ITERATIONS AND 1 ARE EQUILIBRIUM ITERATIONS.
|
|
|
|
TIME INCREMENT COMPLETED 1.000E-02, FRACTION OF STEP COMPLETED 0.600
|
|
STEP TIME COMPLETED 6.000E-02, TOTAL TIME COMPLETED 6.000E-02
|
|
|
|
|
|
INCREMENT 9 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT 1.000E-02
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 1
|
|
|
|
|
|
AVERAGE HEAT FLUX 0.439 TIME AVG. HEAT FLUX 0.651
|
|
LARGEST RESIDUAL HEAT FLUX -4.479E-15 AT NODE 3 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. 0.143 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. -2.906E-02 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
THE HEAT FLUX EQUILIBRIUM RESPONSE WAS LINEAR IN THIS INCREMENT
|
|
|
|
MAXIMUM NON-PRESCRIBED INCREMENT IN TEMPERATURE IS 0.143
|
|
|
|
ITERATION SUMMARY FOR THE INCREMENT: 1 TOTAL ITERATIONS, OF WHICH
|
|
0 ARE SEVERE DISCONTINUITY ITERATIONS AND 1 ARE EQUILIBRIUM ITERATIONS.
|
|
|
|
TIME INCREMENT COMPLETED 1.000E-02, FRACTION OF STEP COMPLETED 0.700
|
|
STEP TIME COMPLETED 7.000E-02, TOTAL TIME COMPLETED 7.000E-02
|
|
|
|
|
|
INCREMENT 10 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT 1.000E-02
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 1
|
|
|
|
|
|
AVERAGE HEAT FLUX 0.383 TIME AVG. HEAT FLUX 0.624
|
|
LARGEST RESIDUAL HEAT FLUX -1.998E-15 AT NODE 4 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. 0.122 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. -2.148E-02 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
THE HEAT FLUX EQUILIBRIUM RESPONSE WAS LINEAR IN THIS INCREMENT
|
|
|
|
MAXIMUM NON-PRESCRIBED INCREMENT IN TEMPERATURE IS 0.122
|
|
|
|
ITERATION SUMMARY FOR THE INCREMENT: 1 TOTAL ITERATIONS, OF WHICH
|
|
0 ARE SEVERE DISCONTINUITY ITERATIONS AND 1 ARE EQUILIBRIUM ITERATIONS.
|
|
|
|
TIME INCREMENT COMPLETED 1.000E-02, FRACTION OF STEP COMPLETED 0.800
|
|
STEP TIME COMPLETED 8.000E-02, TOTAL TIME COMPLETED 8.000E-02
|
|
|
|
|
|
INCREMENT 11 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT 1.000E-02
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 1
|
|
|
|
|
|
AVERAGE HEAT FLUX 0.334 TIME AVG. HEAT FLUX 0.597
|
|
LARGEST RESIDUAL HEAT FLUX 3.331E-15 AT NODE 4 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. 0.105 AT NODE 3 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. -1.708E-02 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
THE HEAT FLUX EQUILIBRIUM RESPONSE WAS LINEAR IN THIS INCREMENT
|
|
|
|
MAXIMUM NON-PRESCRIBED INCREMENT IN TEMPERATURE IS 0.105
|
|
|
|
ITERATION SUMMARY FOR THE INCREMENT: 1 TOTAL ITERATIONS, OF WHICH
|
|
0 ARE SEVERE DISCONTINUITY ITERATIONS AND 1 ARE EQUILIBRIUM ITERATIONS.
|
|
|
|
TIME INCREMENT COMPLETED 1.000E-02, FRACTION OF STEP COMPLETED 0.900
|
|
STEP TIME COMPLETED 9.000E-02, TOTAL TIME COMPLETED 9.000E-02
|
|
|
|
|
|
INCREMENT 12 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT 1.000E-02
|
|
|
|
NUMBER OF EQUATIONS = 10 NUMBER OF FLOATING PT. OPERATIONS = 2.96E+02
|
|
|
|
CHECK POINT START OF SOLVER
|
|
|
|
CHECK POINT END OF SOLVER
|
|
|
|
ELAPSED USER TIME (SEC) = 0.0000
|
|
ELAPSED SYSTEM TIME (SEC) = 0.0000
|
|
ELAPSED TOTAL CPU TIME (SEC) = 0.0000
|
|
ELAPSED WALLCLOCK TIME (SEC) = 0
|
|
|
|
CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION 1
|
|
|
|
|
|
AVERAGE HEAT FLUX 0.292 TIME AVG. HEAT FLUX 0.572
|
|
LARGEST RESIDUAL HEAT FLUX 5.497E-15 AT NODE 3 DOF 11
|
|
INSTANCE: PART-1-1
|
|
LARGEST INCREMENT OF TEMP. 9.121E-02 AT NODE 3 DOF 12
|
|
INSTANCE: PART-1-1
|
|
LARGEST CORRECTION TO TEMP. -1.417E-02 AT NODE 1 DOF 12
|
|
INSTANCE: PART-1-1
|
|
THE HEAT FLUX EQUILIBRIUM RESPONSE WAS LINEAR IN THIS INCREMENT
|
|
|
|
MAXIMUM NON-PRESCRIBED INCREMENT IN TEMPERATURE IS 9.121E-02
|
|
|
|
ITERATION SUMMARY FOR THE INCREMENT: 1 TOTAL ITERATIONS, OF WHICH
|
|
0 ARE SEVERE DISCONTINUITY ITERATIONS AND 1 ARE EQUILIBRIUM ITERATIONS.
|
|
|
|
TIME INCREMENT COMPLETED 1.000E-02, FRACTION OF STEP COMPLETED 1.00
|
|
STEP TIME COMPLETED 0.100 , TOTAL TIME COMPLETED 0.100
|
|
|
|
|
|
THE ANALYSIS HAS BEEN COMPLETED
|
|
|
|
|
|
|
|
ANALYSIS SUMMARY:
|
|
TOTAL OF 12 INCREMENTS
|
|
1 CUTBACKS IN AUTOMATIC INCREMENTATION
|
|
17 ITERATIONS INCLUDING CONTACT ITERATIONS IF PRESENT
|
|
17 PASSES THROUGH THE EQUATION SOLVER OF WHICH
|
|
9 INVOLVE MATRIX DECOMPOSITION, INCLUDING
|
|
0 DECOMPOSITION(S) OF THE MASS MATRIX
|
|
1 REORDERING OF EQUATIONS TO MINIMIZE WAVEFRONT
|
|
0 ADDITIONAL RESIDUAL EVALUATIONS FOR LINE SEARCHES
|
|
0 ADDITIONAL OPERATOR EVALUATIONS FOR LINE SEARCHES
|
|
0 WARNING MESSAGES DURING USER INPUT PROCESSING
|
|
0 WARNING MESSAGES DURING ANALYSIS
|
|
0 ANALYSIS WARNINGS ARE NUMERICAL PROBLEM MESSAGES
|
|
0 ANALYSIS WARNINGS ARE NEGATIVE EIGENVALUE MESSAGES
|
|
0 ERROR MESSAGES
|
|
|
|
|
|
|
|
JOB TIME SUMMARY
|
|
USER TIME (SEC) = 0.20000
|
|
SYSTEM TIME (SEC) = 0.10000
|
|
TOTAL CPU TIME (SEC) = 0.30000
|
|
WALLCLOCK TIME (SEC) = 1
|